ClariSea SK-3000 (GEN2)

The ClariSea fleece filter is a high efficiency water filtration system which effectively removes suspended particles such as micro algae, detritus, food, organic waste and gravel dust from the water column. Suitable for use in marine aquariums, freshwater aquariums, fish-breeding systems and propagation systems for corals. BRILLIANTLY CLEAR WATER A ClariSea filter will completely replace the need for high maintenance filter socks and result in brilliantly clear water in your aquarium. LIGHT PENETRATION The use of a ClariSea fleece filter will ensure the highest possible filtration efficiency for optimal light penetration and growth of your corals and plants. REDUCED ACCUMULATION OF ORGANIC WASTE Continuously removes detritus & organic waste from the water column preventing breakdown to nitrate & phosphate in your aquarium. REDUCED LOAD ON PROTEIN SKIMMER The ClariSea fleece filter dramatically reduces the load on your protein skimmer by removing even the smallest of particles. REDUCED MAINTENANCE Constant filtration results in reduced maintenance of pumps, wave makers and protein skimmers, plus... no more socks to clean. NO MORE DETRITUS A ClariSea fleece filter will noticeably reduce the accumulation of detritus in your aquarium substrate and sump.   Smart Controller Functions Buttons & Functions Motor button • Manually advances fleece motor Alarm button Press alarm button for 1 - 2 seconds will turn off audible alarm, but alarm condition will still be present • Red LED still flashing • Automatic advance of fleece disabled. • Motor button will still function as manual advance. Pressing the alarm button for > 5 seconds:- • Full reset - completely clearing alarm state • Disconnecting power: performs reset as above. Normal Operation Initialisation (Power on or reset): • Blue/Red LED both flash for 5 times (audible alarm will sound with each flash) • Blue LED will remain on. Motor Advance: Manual or automatic, Blue LED flashes Possible Alarm Conditions: Possible roll jam/motor failure (float held in up position for more than 5 seconds) • Red alarm LED will flash • Audible alarm will sound for 2 seconds every 5 seconds • Automatic advance of fleece disabled. Possible fleece empty (float not triggered within 8 hours) • Blue/Red LED both flashing, audible alarm will sound for 1 second every 2 seconds • Automatic advance of fleece disabled. Possible installation error (float not triggered with 48 hours) • Red LED will flash at 10 second intervals (audible alarm will sound with each flash) • Automatic advance of fleece disabled. Installation advice, tips and troubleshooting Please view the CLARISEA INSTALLATION GUIDE For the Quick Start Guide and dimensional drawings please download the files below. Important note: Only use the 20MM bolt to attach the motor to the Clarisea as per our Quick start guide below, do not use the 30MM bolt , this is for the clean fleece. Using the 30MM long bolt to attach the motor will result in damage to the motor assembly.