Sidebar
CORAL ESSENTIALS Coral Power Trace B

CORAL ESSENTIALS Coral Power Trace B

$28.00

In Stock

  • FREE Store Pick Up
Size

RCE-00004

Category:

Our Coral Essentials, Coral Power Trace-B is a concentrated blend of Iron, Zinc, Copper, Manganese, Chromium, Cobalt and Nickel. These trace element metals become depleted in marine tanks and need to be replaced. The Iron in our Coral Power Trace-B is at a concentration of 100,000ppm. Use of our Coral Power Trace-B is essential to maintain good growth, and bright colouration of SPS coral. The coral shines and shimmers after regular dosing. Also many other biological processes in marine tanks utilise the trace elements in this blend.

Dosage rate: We recommend starting off dosing 1 drop (0.05ml)/day for each 100L of tank water. If the results are good and depending on the coral density in your tank you can increase steadily to 2-3 drops (0.1-0.15ml)/day over a period of a month or so. Do not dose higher than 4 drops (0.2ml)/day for each 100L of water in a heavily stocked system.

For the advanced aquarist 0.1ml (2 drops) will raise the iron levels by 0.1 ppm (mg/L) for each 100L of tank water. If you know the iron depletion rate then dose accordingly as per above.

Dilution for dosing pump
Our Coral Power Trace A, B and C can be diluted in RODI water to enable them to be dosed via automatic dosing pumps.

  1. We recommend diluting each of the three Traces into their own 1 litre solution.
  2. Do Not dilute all 3 Traces into one solution.
  3. If you only have 2 spare dosing pumps, Trace A and Trace B can be combined together in the one container.  Trace C must never be combined with Trace A or Trace B.
  4. For diluting each Trace separately, pour 50ml of each (either a whole 50ml bottle or half a 100ml bottle) into their own mixing container and add 950ml of RODI water.
  5. If combining Trace A and B together, then do Step 4 above for Trace C, then pour 50ml of Trace A and 50ml of Trace B together in the one mixing container and add 900ml of RODI water.
  6. Stir contents of all containers until mixed thoroughly.
  7. Pour required amount of each into the appropriate dosing container.
Use the following dosage rates for your tank:
  • Low SPS stock: 0.5ml per 100L (26.5 US Gallons) of aquarium volume per day of each Trace solution.
  • Medium SPS stock; 1ml per 100L (26.5 US Gallons) of aquarium volume per day of each Trace solution.
  • High SPS stock; 2ml per 100L (26.5 US Gallons) of aquarium volume per day of each Trace solution.
These recommendations are a base line only, you may need to tweak the dose as every tank is different and will use trace elements differently.


Available in 50ml and 100ml



Available in 50ml and 100ml

Free pick up at 108 Owen Road 218915 only
CORAL ESSENTIALS Coral Power Trace B